DESCRIPTION

Test equipment conforming to -ASTM D86, ASTM D850, ASTM D1078

with electric heating assembly with Copper coil type voltage variac temperature controller, cooling bath (non-refrigeration), distillation flask, graduated cylinder , heater boards ,diameter center holes made of Ceran Glass, thermometers conforming to ASTM D86, ASTM D850, ASTM D1078 supplied with certificate.

TECHNICAL SPECIFICATION

1. Equipment Would comply with -ASTM D86, ASTM D850, ASTM D1078

2. Equipment would have the following features/components;

• Powder coated exterior body in attractive shades

• Flask heater compartment with cooling fan.

• Smooth lifting device for flask

• Low voltage long lasting heating coil with precise power adjustment by potentiometer.

• CLASS - A, PT-100 with temperature indicator for vapor .

• Temperature indication and controller for condenser and receiver section.

• In-built refrigeration system for condenser and receiver.

• Fire extinguisher (Manual - External N2/C2 is required)

• Optical sensor with beep for accurate reading of IBP and every drop with LED Flashing. .

• Glass PT 100 Vapor Temperature Probe with Digital Indicator (Auto barometric correction)

3. Technical Specifications

• Distillation group : 0 to 4 solvents .

• Work temp : 0 °C to 450 °C .

• Vapor temp : 0 °C to 450 °C, Accuracy : ±0.1 °C .

• Temp sensor : PT-100 Probe, Class A .

• Display: Digital temperature controller cum indicator

• Sample Volume: Optical measuring system, 0 to 103% of charge volume

• Volume resolution: 0.1 ml .

• Distillation rate: 2-15 ml/min (Programmable) .

• Dry point: In-built dry point detection probe

• Pressure correction: Range 700 to 1100 hpa (500 to 800 mm of hg)

• Condenser temperature: 0-80 °C (Programmable), Accuracy : ± 0.5 °C .

• Receiver temperature: 0-60 °C (Programmable), Accuracy : ± 0.5 °C .

• Operating Temperature: 10 - 35 Accuracy : ± 0.5 °C .

4. Accessories will be supplied:

GLASS PT-100 VAPOR TEMPERATURE PROBE WITH DIGITAL INDICATOR - AUTOMATIC BAROMETRIC CORRECTION- 1 Nos

Instruction manual will be provided along with the apparatus.

 DESCRIPTION

This standard outlines a method for determining the temperature at which solid hydrocarbon crystals form in turbine and reciprocating engine fuels under cooling conditions. These conditions may occur during flight or while on an airfield, making this test critical for aviation safety and fuel reliability.

1. Equipment Would comply with ASTM D1177, ASTM D2386

2. Equipment  following features/components;

? The entire instrument assembly Consists of Unsilvered

? vacuum flask approx. 10 liter capacity, Jacketed (or higher capacity)

? sample tube, Brass packing gland, Motorized stirrer,

? Stopper, Clamps, Refrigerated water-bath and Stand.

? Temperature range from 0 to -70 oC.

Instruction manual will be provided along with the apparatus.

 DESCRIPTION

Used for determination of kinematic and intrinsic viscosity Of fuels, lubricants & petrochemical raw materials at constant temperatures in accordance with ASTM D445, IS 1448 (P-25), ASTM D446

TECHNICAL SPECIFICATION

1. Equipment Would comply with ASTM D445, IS 1448 (P-25), ASTM D446

2. Equipment would have the following features/components;

• Microprocessor based circuitry assures precise, reliable temperature control within specified tolerances throughout the operating range of the bath i.e. -40 °C to ambient temperature

• Dual digital displays show set and actual bath temperature

• Simple push button controls and digital display would permit easy setting and monitoring of bath temperature.

• Bath accommodates 04 Nos glass capillary reversion viscometers of various types at a time

• Viewing the viscometers is will be made easy by technical Specifications of Refrigeration System:

3. Technical Specifications:

Bath:

• glare?free fluorescent illumination.

• Temperature control uniformity is assured by means of motorized stirrer.

• Frost free glass window for low temperature bath

• Control panel is mounted on a side of the bath

• Complete exterior body is finished with attractive powder coated paint

Compressor:

? Hermetically Sealed Compressor

Condenser:

? Fin & Tube type Air?Cooled .

• Condenser Refrigerant: R134a .

Refrigeration System:

• Compressor : Hermetically Sealed Compressor

• Condenser : Fin & Tube type Air Cooled Condenser .

• Cascade System: For below -40°C ranges .

• Refrigerant: R404a .

Other components:

• Volume of the bath : 23 Litres capacity .

• Temperature Control : Range : -40 °C to ambient .

• Temperature controller : Microprocessor based Auto Tune PID Digital Temp controller cum indicator .

• Temperature sensor : PT 100 Sensor .

• Temperature Display : LED Display .

• Display resolutions : 0.1 °C .

• Temperature Accuracy : ± 0.5 °C .

• Heater : Immersion heater .

• Viewing window : Vacuum glass window for frost free viewing below 5°C range

• Stirrer : 1400rpm motor with stirrer for uniform Temperature .

• Inner chamber : Stainless Steel S.S. 304 Grade with tempered glass .

• Exterior body : Fabricated from mild steel material, which is powder coated in attractive shades

• Illumination : PL Lamp .

• Accessories : Would be supplied complete with Viscometer holders

• Accommodate : 04 Nos of viscometers (minimum)

• Bath Media : ISOPROPYL ALCOHOL or suitable heat transfer fluid .

Instruction Manual will be provided.