TECHNICAL SPECIFICATION

In an upright microscope, the source of transmitted light and the condenser are located below the stage, pointing up. The objectives are placed on top of the stage, pointing down. The specimen is observed from the top through the lid of a petri dish or a coverslip.

Body - Trinocular Head inclined at 45°.

Focussing - Both side co-axial focussing knobs.

Nosepiece - Quadruple revolving nosepiece with accurate centering & positive click stops.

Stage - Large Co-axial Mechanical Stage for X-Y movement of specimens.

Illumination - Bright field vertical illuminator 6V-20W Halogen with field diaphragm, filter slots

and bulb centering mechanism.

Objectives - Achromatic DIN M4X-M10X & M40X.

Eyepieces - WF10X-H16X

Observation Method: Bright field

Objective/Nosepiece: Quadruple

Objective Magnification: 2.5x, 5x, 10x, 20X, 50x

Observation Tube Type: Binocular Tube

Light Filter: Blue

Eyepiece Magnification: With 10x magnification

Field of View: 20 mm

Viewing Head Inclination: 45 degree

Features of Optics/Lens: Polarizer & rotatable Analyser slider

Scanning Stage Type: Motorized - 2 axis Stage

Minimum X-Axis Travel Length (in mm): 75 millimeter

Minimum Y-Axis Travel Length (in mm): 40 millimeter

Minimum Z-Axis/Focus Travel Length (in mm): 10 millimeter

Accuracy of XY-Stage: +/-5 µm

Repeatability of XY-Stage: <2 µm

Resolution of XY-Stage: 0.1 μm

Resolution of Focus: <=10 nm

Accuracy of Focus: GOOD

Repeatability of Focus: GOOD

Motorized Stage Control: Through PC Software

Power Supply: 100 - 240 VAC, 50-60 Hz

Instruction manual will be provided along with the apparatus.

TECHNICAL SPECIFICATION

A weighing balance is a device that measures the weight or mass of an object. Weighing balances are used in laboratories, pharmacies, 

Capacity: 220g

Graphic display: coloured

Display size: 5.7 inch

Response time: 5 second

Weighing pan, mm: 40x40 or better

Eccentricity deviation (sd) (test load): 0.1mg (100g)

Capacity: 220g

Linearity deviation, mg: 0.2

Sensitivity offset, nominal load, mg: 0.01

Repeatability, mg: 0.01

Readability: 0.1mg/0.01mg

Operating temperature: 5 to <50 °c

Frequency (hertz): 50-60

Voltage (volt): 110-220

Display type: LCD

Instruction manual will be provided along with the apparatus.

TECHNICAL SPECIFICATION

Probe Tip diameter: 3mm

Extra Titanium probe diameter in mm: 12-25

Variable processing time, range (second): 60

Variable probe tip amplitude range (in micron): 0.25

Weight: 4 kilogram

No. of replaceable tip included in the offer: 1

Additional Items: Titanium, probe, sound enclosure box

Working temperature range (in Deg. C): 35

Replaceable tip: Slots or flats cut over it

Power: 650 Watt

Variable Frequency (Khz): 25

Fixed Frequency (kHz): 20

Manual will be provided .

Display: Digital

Minimum speed possible, RPM: 50

Magnetic Stirrer Type : Variable Speed

IP Rating: 42

Speed Control Accuracy of set speed (+/-) (RPM): 2

Maximum Stirring capacity per position: 2000 milliliter

Top plate material: Cast Aluminium

Base Material: Mild steel

User Interface: Digital front panel

Weight: 1.5 Kg

Permissible relative humidity, %: 50

Input Voltage with Phase (V): 220 V, 50 Hz AC, single phase

Input Current (A): 5

Power Consumption: 230 Watt

Speed Mode: Variable Speed

Speed (RPM): 1200

Minimum Speed increment step (RPM): 50

Maximum Speed (RPM) of variable speed mode equipment: 1200

External Dimension, Depth: 160 millimeter

External Dimension, Height: 30 millimeter

External Dimension, Width: 50 millimeter

Body Material: Metal Alloy

Finish of body material: Powder coated

Stir bar cover material: PTFE

Stir bar length: 1 millimeter

Heating capacity, Watt: 200

Power Supply, V: 220

Frequency, Hz: 50

Phase: Single phase

Tank capacity,(Litre): 11

Transducer (37-42 KHz): 200

Weight Kg: 14