Confirming to IS : 5513-1976

For determination of consistency of standard cement paste and initial and final setting times of cement. The equipment comprises the

following :-

A frame with a vertically movable rod having a cap at the top.

V icat mould in the form of frustum of a cone with internal diameter of 60 mm at the top, 70 mm at the bottom and a height of 40 mm.

Glass base plate for the mould.

Initial Setting Time Needle.

F inal Setting Time Needle.

Consistency plunger.

This model is a motorized unit operating on 220 V, Single Phase Supply, comprising of a four pillar loading unit with a jack at the base. The top of the jack carries the table for the beam and has two rollers whose center distance can be adjusted to suit cross sectional area of model beam. Top plate has an adjustable seating and a member with two rollers. Flexure Testing Machine Electrically Operated, Material of Construction: Weight of the Load Frame: Min. 130kg

Hydraulic System: With Min. 15 liters, hydraulic oil feed and fuel pump separately, 0.5 hp, 1 Ph, 220V AC motor driven two-speed hydraulic pump. Standard confirm to:- Conforms to IS 516 and IS : 14858, Machines conforming to ASTM C39.