Used for determining the ductility of bitumen. Two rates of travel i.e. 5 cm/minand1cm/min.

Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.

Ductility Mould, with Base Plate …3 Nos. As per 1208 -1978.

Made of SS.

·      The machine consists of a moving carriage that moves over a lead screw.

·      An electric motor driven reduction gear ascertains trouble-free and constant speed enabling continuous operation.

·      The whole assembly is mounted by a stainless steel water bath completely enclosed in a metal housing having glass wool insulation.

·      It is equipped with an electric pump circulator and a heater. Herein, the temperature is controlled thermostatically.

·      The machine is fitted with three ductility molds and has two rates of travel; 10 mm & 50 mm.

Cylindrical cell 150 mm diameter with fitting plunger and base plate.

Metal tamping rod of circular cross section 16mm in diameter and 45 to 60 cm long, rounded at one end.

Conforming to specifications IS 2386 (Part4) & IS 9376.

Used for measuring resistance of an aggregate to crushing

Accordance with IS 2386 (Part 4), IS: 9377.

Used for determining the aggregate impact value.

Heavy circular base with two vertical guides fitted with a cross bar at the top.

A hammer of 13.75 kg mass which can be raised and allowed to fall freely through 380±5 mm

Hammer is provided with locking arrangement. Tamping rod 10 mm diameter x 230 mm long. Cylindrical Cup

Used for determining the temperature at which a bituminous material loaded by a 9.5 mm dia steel balls drops under specified heated conditions.

Magnetic stirrer with heating facility. Digital temperature display.

Tapered Rings - 2 Nos.

Ball Centering Guide 2 Nos. Steel Balls of 9.5 mm dia 2 Nos. Ring holder- 1 No.

Electric Heater (Hot Plate) 1 No. Thermometer IP 60C

Suitable for operation on 220 V, 50 Hz, single phase, AC supply.