TECHNICAL DETAIL
The mixer consisting of a steel vessel of 30 litres, mounted on a frame.
The vessel would rotate at 20-24 RPM with the help of a motor and a pulling.
The vessel can be tilted to any angle by a handle. This facilitates mixing and discharge.
Blades are provided inside the vessel to mix the material thoroughly.
The large handle strip facilitates manual rotation of the drum during power failure.
The drum, handle and motor etc. are mounted on a steel frame.
This model is provided with two large wheels for carting away.
Supplied complete, with motor of 1 HP along with lead wire.
Suitable for operation on 220V,
50Hz, Single Phase, AC supply.
CONCRETE MIXER, DRUM TYPE, CAPACITY 30L
TECHNICAL DETAIL
The mixer consisting of a steel vessel of 30 litres, mounted on a frame. The vessel would rotate at 20-24 RPM with the help of a motor and a pulling. The vessel can be tilted to any angle by a handle. This facilitates mixing and discharge. Blades are provided inside the vessel to mix the material thoroughly. The large handle strip facilitates manual rotation of the drum during power failure. The drum, handle and motor etc. are mounted on a steel frame. This model is provided with two large wheels for carting away. Supplied complete, with motor of 1 HP along with lead wire. Suitable for operation on 220V,50Hz, Single Phase, AC supply.
CONCRETE MIXER PAN TYPE 250L CAPACITY
TECHNICAL DETAIL
Mild steel pan, Maximum grain size of 60mm, rotation speed of 30rpm
Supplied complete, with motor of 1 HP along with lead wire.
Suitable for operation on 220V, 50Hz, Single Phase, AC supply.
PULL OUT BOND TEST FOR CONCRETE
TECHNICAL DETAIL Digital Rebar Pull-Out Force Tester with Steel Hydraulic Cylinder, 30 tons capacity, with LPI batter
JAW CRUSHER, THREE PHASE
TECHNICAL DETAIL
1.Designed to speed-up crushing of aggregates, Ores, Mineral, Coal and similar materials.
2.Compact and rugged for laboratory and small production units.
3.Manganese steel jaws adjustable upto 6 mm opening. 4.250kg materials can be crushed in approx. eight hours
5.Discharging opening adjustment range: 3-1 0mm
6.Supported with strong steel frame.
7.Suitable to crush any type of stone up to 45mm.
8.Suitable for cement and chemical laboratories.
9.Suitable for operation on 415V, 50Hz, 3 Phase, AC supply.
JAW CRUSHER, THREE PHASE PULL OUT BOND TEST FOR CONCRETE CONCRETE MIXER PAN TYPE 250L CAPACITY CONCRETE MIXER, DRUM TYPE, CAPACITY 30L CONCRETE MIXER, DRUM TYPE, CAPACITY 30L
