1.Designed to speed-up crushing of aggregates, Ores, Mineral, Coal and similar materials.
2.Compact and rugged for laboratory and small production units.
3.Manganese steel jaws adjustable upto 6 mm opening. 4.250kg materials can be crushed in approx. eight hours
5.Discharging opening adjustment range: 3-1 0mm
6.Supported with strong steel frame.
7.Suitable to crush any type of stone up to 45mm.
8.Suitable for cement and chemical laboratories.
9.Suitable for operation on 415V, 50Hz, 3 Phase, AC supply.
PULVERISER THREE PHASE, NEW MODEL
TECHNICAL DETAIL
Designed for grinding materials to produce fine mesh samples , suitable to grind up to 150 micron. The motor & gear assembly would be supported by two nos. of bearing blocks and mounted on sliding carriage. The gap of two grinding wheels be adjustable by rotating wheel of sliding carriage.
Specifications:
•Dia of Grinding Wheel - 175mm
•Material for Grinding Wheel High Carbon Steel having 55-60 HRC Hardness
•Input Size of Material < 6mm
•Output size of Material ; >.150 μ
Suitable for operation on 415V, 50Hz, 3 Phase, AC supply.
JOLTING APPARATUS
TECHNICAL DETAIL
Ref. Standard - IS:10078, EN-196-1-13454-2
The Jolting apparatus consists of a rectangular table, rigidly connected by two support arms to spindle at a horizontal distance of 800 mm from the centre of
the table. The table may be allowed to be raised and fall freely by a cam
connected to a motor with rotation at a rate of 60 rpm. A digital counter with sensor is provided, which stops the machine after 60 jolts. Locating pins are provided for mounting the mould compartments on the table. The mould, surrounded by the hopper, can be clamped rigidly to the table. Supplied complete with mould and hopper. Suitable for operation with 220V, 50 cycles, single phase, AC Supply.
The equipment consist of the following replaceable parts : Counter, Aluminum hopper, Jolting Mould
Mould for Flexural Prism
Steel, three compartments, each of 40 x 40 x 160 mm
VIBRATING TABLE, 1M X 1M FOR 16 MOULDS OF 150MM CUBE
TECHNICAL DETAIL
Ref. : EN 12350-6, 7, 12390-2, 13286-50
The table top be suitable to hold cube moulds and has stops along its edges to prevent moulds from sliding off the table during operation. The specially designed Vibro motor for operating the vibrator. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.
•Vibrating Table, Table top 1M X 1M for 16 moulds of 150mm cube
VIBRATING TABLE, 1M X 1M FOR 16 MOULDS OF 150MM CUBE
TECHNICAL DETAIL
Ref. : EN 12350-6, 7, 12390-2, 13286-50
The table top be suitable to hold cube moulds and has stops along its edges to prevent moulds from sliding off the table during operation. The specially designed Vibro motor for operating the vibrator. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.
•Vibrating Table, Table top 1M X 1M for 16 moulds of 150mm cube
VIBRATING TABLE, 1M X 1M FOR 16 MOULDS OF 150MM CUBE VIBRATING TABLE, 1M X 1M FOR 16 MOULDS OF 150MM CUBE JOLTING APPARATUS PULVERISER THREE PHASE, NEW MODEL JAW CRUSHER, THREE PHASE