DESCRIPTION

    Ø  Split tensile strength attachment for Compression Testing Machine for 2000kN CTM

DESCRIPTION

As per the IS Code 9669, Digital Load Frame with LCD 50 kN Capacity with min 4 Speed 1.5, 1.25 2.5 mm/min and true speed control upto 15mm/min • Two pillar type. • Horizontal Clearance-265mm min • Vertical clearance-700mm min • Maximum Platen dia-130mm with Hardness of material (platen): 60 RHC. • Ram Dia 50mm • The lower platen moves up and down • A dial gauge mounting bracket is provided on one of the two pillars. • Suitable for operation on 220 V, 50 Hz, single phase,AC supply Paint quality:-Powder coating 70-80 micron thick Material of Construction: Special quality low carbon mild steel Mould - MS150mm ID x 175 mm H, Perforated Base Plate - MS Extension Collar - MS150 mm ID x 50 mm high Penetration Piston 50 mm face dia Circular Metal Spacer Disc, with detachable handle, 148 mm dia x 47.7 mm high, Annular Metal Weight 2.5 kg, 147 mm dia with 53 mm dia central hole Slotted Metal Weight 2.5 kg, 147 mm dia, with 53 mm dia slot Rammer 2.6 kg, 310 mm controlled drop Rammer 4.9 kg, 450 mm controlled drop Proving Ring Capacity 50 kN Dial Gauge 25 mm travel, 0.01 mm least count. Load frame pillar thread M30 X 600mm. Suitable for operation on 220 V, 50 Hz, single phase, AC supply.

DESCRIPTION

As per the IS:2720 (Part 30) with special motor, Rotation 0.10/sec. Rate of rotation : 1/60 rpm Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply. Container 1 No.Set of 4 Springs, (one each of capacity 2 kg-cm, 4 kg-cm, 6 kg-cm and 8 kg-cm min)

DESCRIPTION

As per the IS:2720 (Part 2) The speed of drying (about 30 min), The infrared radiation is controlled by a voltage regulator. The instrument is provided with an indicator lamp. The balance scale (drum) is divided in terms of moisture percentage on wet weight basis, which are read directly from it. Graduations are from 0 to 100% in 0.2 % divisions. Suitable for operation on 220 V, 50 Hz, Single phase, AC Supply. Capacity : min 5g approx. Sensitivity : min 10 mg approx. Range : 0 to 100% moisture content on wet weight basis. Reading accuracy : min ± 0.20% Probable error : min ± 0.25% in the lower range upto compared to 25% and ± 1% for moisture contents Oven methods : above 50% Equipment consisting of :- Infra Red Lamp Thermometer (L-shaped) .

Microprocessor based load frame 2 kN Capacity with proving ring and dial gauges ,with related software Ref. Standards IS :11229, 2720 (Part 13) Supplied complete with carriage, loading hanger and 10:1 lever loading device. Suitable for specimens of size 60×60×25mm. Membrane keypad and the 40×2 LCD display. Precision loading rate of 0.00001 to 9.99999mm / minute. Suitable for operation on 220 V, 50 Hz, Single phase, AC Supply. Microprocessor control Accepts specimen 60mm square Shear Box Assembly, This assembly comprises of : Halves of the Shear Box 2 Nos. Plane Gripper Plate - 2 Perforated Gripper Plate - 2 Porous Stone - 2 Top Loading Pad - 1 Base Plate - 1 Specimen Cutter - 1 Min normal stress - 3 kg/cm2 Operation : Motorised Variable Rates of Strain Specimen Size : 60 x 60 x 25 mm Compression - Tension Proving Min Ring, 2 kN capacity Dial Gauge - 2 .