Digital Compression Testing Machine: Capacity Min: 2000kN with touch screen display with TFT with Min. 800 X 480 Pixel. Real time display of time Vs Load in Kn/Mpa.

Least count:- Min. 0.1KN,

Maximum Clearance Between Platens:-370mm;

Maximum Distance Between Side Plates:-340mm;

Platen Size:-Min. 222.0 Dia,

Piston Dia:-Min. 222.2mm

Piston Stroke:-50mm;

Hydraulic System: With 15 liters.

Control System:- Microprocessor based, pace rate control option will be incorporated through lever.

Auto shut down facility.

Would consist of parfex glass fixed safety door on the front and back.

Calibration & validation:- machine will be with NCCBM/NABL calibration certificated with traceability certificate. Digital Indicator has provision to configure more than one Mode.

Mode1-Compression/Mode2-Flexure/Mode3- Prism Testing/Mode4-Tensile Splitting strength.

Communication with software support.

Machine would supplied with followings:-

1)Loading Unit consisting of Loading Frame with Jack, Dust Cover &Upper Platen.

2) Pumping Unit

3)E.D.I- Touch Screen

4)Spacer with Locating Pin:-4 Nos

5) Step Pin with Ring:- 1 No 6) Flexible Hose Pipe:- 1 No

7) Hydraulic Oil:- 15 Ltrs

8) Lifting Handle for Ram:- 1 No

9) Spanner 24 x 27:- 2Nos .

10) Allen Key 3mm:- 1 No

11)Main cable for EDI:- 1No

12) Control motor cable:- 1 No .

13)Eye Hook:- 1 No .

14) Dust Cover:- 1 No

15) Calibration Certificate- 1 No 16)Operating Manual:- 1 No

DESCRIPTION

Digital Compression Testing Machine: Capacity Min: 2000kN with touch screen display with TFT with Min. 800 X 480 Pixel. Real time display of time Vs Load in Kn/Mpa.

Least count:- Min. 0.1KN,

Maximum Clearance Between Platens:-370mm;

Maximum Distance Between Side Plates:-340mm;

Platen Size:-Min. 222.0 Dia,

Piston Dia:-Min. 222.2mm

Piston Stroke:-50mm;

Hydraulic System: With 15 liters.

Control System:- Microprocessor based, pace rate control option will be incorporated through lever.

Auto shut down facility.

Would consist of parfex glass fixed safety door on the front and back.

Calibration & validation:- machine will be with NCCBM/NABL calibration certificated with traceability certificate. Digital Indicator has provision to configure more than one Mode.

Mode1-Compression/Mode2-Flexure/Mode3- Prism Testing/Mode4-Tensile Splitting strength.

Communication with software support.

Machine would supplied with followings:-

1)Loading Unit consisting of Loading Frame with Jack, Dust Cover &Upper Platen.

2) Pumping Unit

3)E.D.I- Touch Screen

4)Spacer with Locating Pin:-4 Nos

5) Step Pin with Ring:- 1 No 6) Flexible Hose Pipe:- 1 No

7) Hydraulic Oil:- 15 Ltrs

8) Lifting Handle for Ram:- 1 No

9) Spanner 24 x 27:- 2Nos .

10) Allen Key 3mm:- 1 No

11)Main cable for EDI:- 1No

12) Control motor cable:- 1 No .

13)Eye Hook:- 1 No .

14) Dust Cover:- 1 No

15) Calibration Certificate- 1 No 16)Operating Manual:- 1 No

DESCRIPTION

Slump Test Apparatus with testing rod and base plate, consisting of Slump Cone, Base plate (200mm and height 300mm) with swivel handle, Tamping rod steel, 16 mm dia x 600 mm length as per ISI 7320

Cement Mortar Mould, Steel, for 70.6mm cube with ISI certification mark, IS:10086, machined with a permissible variation of 0.15mm and finished within tolerances of +0.15mm - 0.10mm

DESCRIPTION

Standards - ASTMD1559 BS:598-197, EN-12697-34 Measurement of the resistance to plastic flow of cylindrical specimens of bituminous paving mixture loaded on the lateral surface. The machine can provide measurement data for use with hot mixture containing asphalt or tar and aggregate up to 25.4mm maximum size.

Suitable for operation on 220V, 50 Hz, single phase, AC supply.

Single Speed, Bench top load frame. Max. loading capacity, 50 KN

Specifications :- Maximum Vertical Clearance = 470mm

(Platen Down, Cross-head up) Minimum Vertical Clearance = 250mm (Platen up,

Cross-head down) Horizontal Clearance = 265mm

Platen Diameter = 133mm

Platen Travel = 25mm Platen Speed = 50.8mm/min

Rated Power = 375W

Breaking Head Stability Mould 1 No.

Compaction Mould Steel, cylindrical 3 Nos. Base Plate 3 Nos.

Extension Collar 3 Nos.

Compaction Pedestal, 1 No. A Mould Clamp is fitted to the top of the plate

Compaction Hammer 2 Nos.

Compaction Pedestal and Mould, weight 4.5 kg with a free fall of 457 mm

Load Transfer Bar 1 No. Sample Eject for 4” dia Sample 1 No.

Electronic Conversion Kit for Marshall apparatus

Digital Indicator two channel Load Cell 50 kN

displacement Transducer LVDT 20 mm

Dial Gauge 25mm travel,0.01mm least count 1 No.

Proving Ring capacity 25 kN. 1 No.