DESCRIPTION

As per the IS:2720 (Part 7), Compaction mould, Dia - 100 mm, Height - 127.3 mm, Volume - 1,000 ml. Rammer:- 2.6 kg

DESCRIPTION

Sieve Shaker, Motorized, with Built-in Digital Timer, • A digital timer adjustable from 0-99 minutes is incorporated as an integral part of the equipment. • The Sieve Shaker can carry up to 8 sieves of 20cm diameter, also supplied with 30cm adaptor. It is driven by a ¼ HP geared motor. , • The Sieve Table is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction. In addition to the gyratory motion of the table, there is a tapping motion as well. Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.

DESCRIPTION

Accordance with IS:2386 (Part 4), IS:9377. Used for determining the aggregate impact value. Heavy circular base with two vertical guides fitted with a cross bar at the top. A hammer of 13.75 kg mass which can be raised and allowed to fall freely through 380±5 mm Hammer is provided with locking arrangement. Tamping rod 10 mm diameter x 230 mm long. Cylindrical Cup Automatic Blow Counter

 Used for determining the temperature at which a bituminous material loaded by a 9.5 mm dia steel balls drops under specified heated conditions. Magnetic stirrer with heating facility. Digital temperature display. Tapered Rings - 2 Nos. Ball Centering Guide 2 Nos. Steel Balls of 9.5 mm dia 2 Nos. Ring holder- 1 No. Electric Heater (Hot Plate) 1 No. Thermometer IP 60C Suitable for operation on 220 V, 50 Hz, single phase, AC supply. IS: 1205, IP:58

DESCRIPTION

Viscometer as per ASTM d4401 & BIS 73 with heater casing,Thermal cover,cup, guard,connector cable,with PT-100 sensor inbuilt. Rotational speed-0-1000RPM Shear Rate-1/s,s-1(4-1)200 Torque range-0-10mNm Shear Stress-Pa 8-1,500 Viscosity Pas-0.006-350 Heater having temp range-0-300 Deg C Operating Voltage-230V,50HZ Measuring system-DIN53019 C25 Serial interface-RS 232/USB Power consumption-4W